Job ID: 16806

Job Purpose: Candidate will be making chemical adds to baths or sumps to ensure PWB’s are properly etched.

Nature of Duties/Responsibilities

• Through use of a computer interface, candidate must be able to enter operating parameters, job information and view various screens to decipher proper operating settings.
• Be able to operate and maintain the various pieces of equipment within the department.
• Measure out the proper quantities and make chemical adds to baths or sumps.
• Manually set up and transfer solution between tanks, totes, or barrels.
• Replace filter material used throughout the various process tanks.
• Clean, dry and properly dispose of used filter material.
• Perform general housekeeping through the entire area. Inspect product for defects and conformance to process specifications.
• Be able to extract various computer reports.
• Provide assistance in performing routine preventative maintenance.
• Scrubbing and cleaning of mechanical devices or hardware.
• Assist in replacement of non-precision mechanical devices.
• Candidate would be required to work on, in, and around open sumps, plating tanks or mechanical hoists.

Education and Experience

• High School Education
• Minimum of 1 year Industry experience preferred
• Familiarity with computers
• Ability to work in and around chemicals
• Good manual dexterity
• Position will require candidate to stand, walk, push and pull transportation carts between depts.
• Must have good verbal and written communication skills.
• Must be available to work overtime and weekends.
• Knowledge in the following PCB plating equipment and processes: Outer Layer etch (SES), Tin Plating, electroytic copper plating, Electroless process.
• Ability to lift up to 50lbs
• Good Visual acuity